Description
Technical characteristics:
✓ Stand with integrated 2 connections for blinds and shutter actuator
✓ KNX shutter actuator (SA) controller with one push button for toggling between normal mode and addressing mode, one push button for toggling between bus and direction operation and 4 x two push buttons for direct operation of roller shutter drives (independent of the EIB)
✓ KNX SA with red LED for displaying normal and addressing mode and one yellow LED for displaying bus and direction operation
✓ KNX SA with 4 load outputs for roller shutter with each 2 pole UP and DOWN function, 230 V voltage and switching cycles of 20 000 at cos φ- 1
✓ Power supply connection with on/off button, fuse and power outlet to another stand
✓ 6 x 4 mm safety connections
✓ Stand housing thickness 5 mm
✓ Stand housing with laser engraved schematic
✓ Shock-resistant cover, tilted in an ergonomically favourable angle of 15°, for placement on a horizontal working surface
✓ Suitable for installation into a carrying case for storage and safe transport
✓ KNX component structure is visual that students would see real component
✓ Stand component description (component marking) can be done in any language
